Product name:

LVCAN-200 – CAN четец

Light vehicle CAN adapter

  • Description
  • Product features
  • Technical details
  • Order

Supported vehicles

LV-CAN200 is designed to acquire data from light vehicles, trucks and buses.

Benefits of LV-CAN200

Access to CAN Bus data enables fleet operators to report on a wide range of information. You can effectively identify areas of improvement within their vehicle operation to drive down overheads and minimize environmental impact.

TECHNOLOGY

  • GNSS i
  • GPRS i
  • SMS i
  • Blue-tooth i

HARDWARE

  • 1x micro SIM card; 1x eSIM i
  • 128MB memory i
  • Internal GSM antenna i
  • Internal GNSS antenna i
  • DIN – digital input – 3 i
  • AIN - analog input – 2 i
  • DOUT – 2 i
  • 1-Wire® – 1 i
  • Accelerometer i
  • Battery – 170mAh Li-ion 3,7V i
  • IP41 i
  • 10 - 30V i
  • Overvoltage protection i
  • eSIM i
  • USB 2.0 Interface i

FIRMWARE

  • NITZ time synch. i
  • Configuration over Blue-tooth i
  • Blue-tooth sensors support i
  • LV-CAN support i
  • ALL-CAN support i
  • Ignition detection i
  • Geo-fence i
  • Sleep modes i
  • Overspeeding detection i
  • FOTA i
  • GPRS commands i
  • RFID 1-Wire® i
  • iButton 1-Wire® i
  • Temp. 1-Wire® i
  • Immobilizer i
  • Eco driving i
  • Green driving i
  • Fuel monitoring LLS (analog) i
  • Jamming detection i
  • NTP time synch. i
  • SMS event i
  • Idling detection i
  • Crash detection i
  • Odometer i
  • Trip detection i
  • Towing detection i
  • Integrated scenarios i
  • Remote configuration over SMS i
  • Offline tracking i
  • Auto Geofencing i
  • Voice call

GSM:

  • Quad-band 900/1800 MHz; 850/1900 MHz
  • GPRS Multi-Slot Class 12 (up to 240 kbps)
  • GPRS Mobile Station Class B
  • SMS (text/data)
  • Dual-SIM (1 x micro SIM card, 1 x eSIM)

Blue-tooth:

  • Blue-tooth specification V4.0
  • Blue-tooth transceiver fully compliant with Blue-tooth specification V4.0 for external peripherals:
    • Voice calls over Blue-tooth
    • Configuration via Blue-tooth
    • OBDII Blue-tooth dongle

 GNSS:

  • Tracking: 33/ 99 acquisition channels
  • -165 dBM sensitivity
  • Hot start <1s
  • Warm Start < 25s
  • Cold start < 35s
  • NMEA-183 protocol
  • GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS
  • Accuracy < 3m

INTERFACE:

  • 2 Digital Inputs (1 reserved for Ignition Status Monitoring)
  • 1 Analog Input (10V or 30V range)
  • 1 configurable input DIN3 or AIN2
  • 2 Digital Open-collector Outputs (connecting external relays, LED, buzzers etc.)
  • 1-Wire® (iButton® , RFID, temperature sensors)
  • Built in accelerometer
  • Power supply (+10…+30) V DC
  • Internal high gain GSM antenna
  • Internal high gain GNSS antenna
  • Dimensions: L(65mm) x W(56,6mm) x H(18,9mm)
  • 2 Status LEDs
  • Micro USB Port
  • Integrated LiPo back-up battery

For Orders and Inquiries

fill in the contact form

Contacts
+359 894 201 616

Sofia 1606, 63, MD "Skobelev" Blvd.