Име на продукт:
FM3612
Усъвършенстван 3G тракера с вътрешни висококачествени GNSS и 3G антени, вътрешна резервна батерия
Технология
Хардуер
Фърмуер
- Описание
- Характеристики
- Технически данни
- Поръчки и запитвания
3G/GSM module
It makes this device usable worldwide, as there are countries which have only 3G network. Device automatically selects available network (3G or 2G) to ensure the best connectivity in area.
Internal high gain antennas
Internal GNSS and 3G antennas make installation easier and faster. Install more units in less time. Internal antennas deliver higher security against possible third party impact.
CAN adapters support
Additional accessories LV-CAN200, ALLCAN300 allow you to acquire CAN data from any kind of transport such as light vehicles, trucks, buses, agriculture transport, and special transport. Supported vehicles list contains more than 1800 models. Each vehicle model has particular instruction for installation with scheme and picture. Available parameters: RPM, Total fuel, Fuel level, Vehicle mileage and more.
1-Wire®
1-Wire® protocol support enables you to identify up to 500 authorized drivers and connect temperature sensor. iButton® or RFID® allows to prevent unauthorized access to your fleet. Temperature sensors gives you possibility to monitor and control your cargo.
Internal battery
Feel safe when vehicle is monitored by device with internal battery. When external power is disconnected, device still remains online and sends data to server plus provides notification of disconnection.
Trip detection
Easy trip start and stop detection gives you possibility to have the report with correct time, location and driven distance for each trip.
Available accessories
TECHNOLOGY
- GNSS i
- GPRS i
- SMS i
- Blue-tooth i
HARDWARE
- 1x micro SIM card; 1x eSIM i
- 128MB memory i
- Internal GSM antenna i
- Internal GNSS antenna i
- DIN – digital input – 3 i
- AIN - analog input – 2 i
- DOUT – 2 i
- 1-Wire® – 1 i
- Accelerometer i
- Battery – 170mAh Li-ion 3,7V i
- IP41 i
- 10 - 30V i
- Overvoltage protection i
- eSIM i
- USB 2.0 Interface i
FIRMWARE
- NITZ time synch. i
- Configuration over Blue-tooth i
- Blue-tooth sensors support i
- LV-CAN support i
- ALL-CAN support i
- Ignition detection i
- Geo-fence i
- Sleep modes i
- Overspeeding detection i
- FOTA i
- GPRS commands i
- RFID 1-Wire® i
- iButton 1-Wire® i
- Temp. 1-Wire® i
- Immobilizer i
- Eco driving i
- Green driving i
- Fuel monitoring LLS (analog) i
- Jamming detection i
- NTP time synch. i
- SMS event i
- Idling detection i
- Crash detection i
- Odometer i
- Trip detection i
- Towing detection i
- Integrated scenarios i
- Remote configuration over SMS i
- Offline tracking i
- Auto Geofencing i
- Voice call
GSM:
- Quad-band 900/1800 MHz; 850/1900 MHz
- GPRS Multi-Slot Class 12 (up to 240 kbps)
- GPRS Mobile Station Class B
- SMS (text/data)
- Dual-SIM (1 x micro SIM card, 1 x eSIM)
Blue-tooth:
- Blue-tooth specification V4.0
- Blue-tooth transceiver fully compliant with Blue-tooth specification V4.0 for external peripherals:
- Voice calls over Blue-tooth
- Configuration via Blue-tooth
- OBDII Blue-tooth dongle
GNSS:
- Tracking: 33/ 99 acquisition channels
- -165 dBM sensitivity
- Hot start <1s
- Warm Start < 25s
- Cold start < 35s
- NMEA-183 protocol
- GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS
- Accuracy < 3m
INTERFACE:
- 2 Digital Inputs (1 reserved for Ignition Status Monitoring)
- 1 Analog Input (10V or 30V range)
- 1 configurable input DIN3 or AIN2
- 2 Digital Open-collector Outputs (connecting external relays, LED, buzzers etc.)
- 1-Wire® (iButton® , RFID, temperature sensors)
- Built in accelerometer
- Power supply (+10…+30) V DC
- Internal high gain GSM antenna
- Internal high gain GNSS antenna
- Dimensions: L(65mm) x W(56,6mm) x H(18,9mm)
- 2 Status LEDs
- Micro USB Port
- Integrated LiPo back-up battery
За поръчки и запитвания
попълнете контактната форма